30 Pack Clear Cabinet Handles,3.8 Inch Clear Drawer Pulls,Acrylic Pulls for Cabinets,Polished Chrome Kitchen Cabinet Hardware,Clear Furniture Pulls

◆Material: Acrylic tube and zinc alloy base;Finish:polished chrome and clear;30 pack ◆Size:5 inch length;3.8 inch hole spacing;1.5 inch height;0.5 inch tube diameter ◆Easy to install: drill holes at the place where you want to install the knob according to the hole spacing, then pass through the screw from the back of board and tighten the pull ◆Usage:suitable for your cabinets,drawer,dresser,cupboard,closet,etc.a perfect decoration to your home ◆Service: We offer free return and free replacement service. Any question, feel free to contact us by Amazon emails, we are always at your service Fashion Furniture Direct is specialized in home hardware, always focusing on providing customers Quality products as well as excellent customer experience. We will send you 1 inch and 1. 77 inch screws both, you can choose the suitable length you need. 1 inch screws suit for cabinet door thickness between 15mm (0. 6 inch or 3/5 inch) and 20mm (0. 6 inch or 4/5 inch), 1. 77 inch screws suit for cabinet door thickness between 35mm (1. 4 inch or 1-2/5 inch) and 40mm (1. 6 inch or 1-3/5 inch). If the screws length are not OK for your cabinet doors, you can match the M4 screws in your local. Other tips: If the base fall off from the tube, you can install it to make it complete. Firstly, install the base onto the acrylic tube, then use screwdriver or other hard tools insert the holes in the base, tighten the parts in the hole, in this way the base can be fixed. We recommend you read our product information to choose the correct hole centers size. If the hole center distance is not OK for your cabinets, you can adjust the hole centers slightly. If it is necessary, before installing the pulls on your cabinet door, you can use the screwdriver or other hard tools insert the holes in the base, loose the parts in the hole to make the base loose, then move the based on the tube to find the suitable position. Normally we leave 10 mm from the edge of the tube on each side to make sure it looks stunning. If you want to make the hole centers distance shorter, you can adjust the two bases from edge to the center. If you need the hole center distance longer, the maximum distance is the tube length minus 12 mm, in this case, you need to adjust the two bases onto the two edges of the tube. Any question, feel free to contact us, we offer free replacements or refund service for 100 days trail.